DIATEST UK shop

Bore Gauges

Precision bore, taper, thread and gear gauging from DIATEST, supplied and supported by our UK team in Chichester.

DIATEST BMD plug gauges and split-ball bore gauges for fast, accurate diameter measurement.

✓ Official DIATEST UK supplier

✓ UK repairs, maintenance & training

✓ Expert advice: +44 (0) 1243 942010

Shop by category

Products

BMD Plug Gauges · Bore Gauges

BMD Plug Gauge (S, D and FB types)

Self-centring two-point plug gauges for fast, accurate bore measurement from Ø 2.98 to 270 mm. Choose the S, D or FB type and the diameter range, then give us your nominal size and tolerance. Ordering: choose your options and add them to the quote basket. Please give the exact nominal size, tolerance and any special requirements in the order notes when you send your quote request. Prices are NET, ex VAT. A complete BMD gauge needs:

  1. BMD plug gauge (S, D or FB type, made to your size) (this product)
  2. Indicator holder (MH), or a DIATRON1500-S which replaces holder and indicator
  3. Indicator: analogue MU or digital MDU
  4. Setting ring: DIN 2250-C or ZR
Add each part to your quote basket, or just tell us in the notes and we'll put the complete gauge together for you.

£436.00 – £2,138.00Price range: £436.00 through £2,138.00 ex VAT

View product

Bore Gauges · Split Ball Probes

Split-Ball Probes (metric)

Self-centring split-ball probes for small bores from 0.47 to 41.1 mm. Standard DLC, carbide, ceramic and blind bore versions. Ordering: choose your options and add them to the quote basket. Please give the exact nominal size, tolerance and any special requirements in the order notes when you send your quote request. Prices are NET, ex VAT. A complete split-ball gauge needs:

  1. Split-ball probe with its needle (choose "with needle" on the probe page) (this product)
  2. Indicator holder (MH6 range)
  3. Indicator: analogue MU or digital MDU
  4. DIATEST setting ring for the probe size
Add each part to your quote basket, or just tell us in the notes and we'll put the complete gauge together for you.

£80.00 – £459.00Price range: £80.00 through £459.00 ex VAT

View product

Bore Gauges · Split Ball Probes

Split-Ball Probes (inch)

Split-ball probes in inch sizes for small bores from 0.0205″ upwards. Standard DLC, carbide, ceramic and blind bore versions. Ordering: choose your options and add them to the quote basket. Please give the exact nominal size, tolerance and any special requirements in the order notes when you send your quote request. Prices are NET, ex VAT. A complete split-ball gauge needs:

  1. Split-ball probe with its needle (choose "with needle" on the probe page) (this product)
  2. Indicator holder (MH6 range)
  3. Indicator: analogue MU or digital MDU
  4. DIATEST setting ring for the probe size
Add each part to your quote basket, or just tell us in the notes and we'll put the complete gauge together for you.

£84.00 – £428.00Price range: £84.00 through £428.00 ex VAT

View product

Bore Gauges · Split Ball Probes

Split-Ball Needles

Replacement and spare needles for DIATEST split-ball, blind bore, T-probes and 3-point probes, in steel or DLC-coated stainless steel. Ordering: choose your options and add them to the quote basket. Please give the exact nominal size, tolerance and any special requirements in the order notes when you send your quote request. Prices are NET, ex VAT. A complete split-ball gauge needs:

  1. Split-ball probe with its needle (choose "with needle" on the probe page) (this product)
  2. Indicator holder (MH6 range)
  3. Indicator: analogue MU or digital MDU
  4. DIATEST setting ring for the probe size
Add each part to your quote basket, or just tell us in the notes and we'll put the complete gauge together for you.

£64.00 – £240.00Price range: £64.00 through £240.00 ex VAT

View product

Bore Gauges · Split Ball Probes

Split-Ball Box Sets

Complete split-ball bore gauge sets in a fitted wooden box: probes, needles and setting rings covering a full measuring range. Ordering: choose your options and add them to the quote basket. Please give the exact nominal size, tolerance and any special requirements in the order notes when you send your quote request. Prices are NET, ex VAT. A box set includes the probes and needles. To use it you also need:

  1. Indicator holder (MH6 range)
  2. Indicator: analogue MU or digital MDU
  3. DIATEST setting ring for the probe size
Add each part to your quote basket, or just tell us in the notes and we'll put the complete gauge together for you.

£117.00 – £8,476.00Price range: £117.00 through £8,476.00 ex VAT

View product

Bore Gauges · Setting Rings

DIATEST Setting Rings (single & sets)

DIATEST setting rings for zeroing split-ball probes, from Ø 0.5 mm, sold singly or as sets matched to the box sets. Ordering: choose your options and add them to the quote basket. Please give the exact nominal size, tolerance and any special requirements in the order notes when you send your quote request. Prices are NET, ex VAT. A complete split-ball gauge needs:

  1. Split-ball probe with its needle (choose "with needle" on the probe page)
  2. Indicator holder (MH6 range)
  3. Indicator: analogue MU or digital MDU
  4. DIATEST setting ring for the probe size (this product)
Add each part to your quote basket, or just tell us in the notes and we'll put the complete gauge together for you.

£35.00 – £2,928.00Price range: £35.00 through £2,928.00 ex VAT

View product

Bore Gauges · Setting Rings

DIN 2250-C Setting Rings

DIN 2250-C setting rings for zeroing BMD plug gauges and other bore gauges, from Ø 1 mm upwards. Ordering: choose your options and add them to the quote basket. Please give the exact nominal size, tolerance and any special requirements in the order notes when you send your quote request. Prices are NET, ex VAT. A complete BMD gauge needs:

  1. BMD plug gauge (S, D or FB type, made to your size)
  2. Indicator holder (MH), or a DIATRON1500-S which replaces holder and indicator
  3. Indicator: analogue MU or digital MDU
  4. Setting ring: DIN 2250-C or ZR (this product)
Add each part to your quote basket, or just tell us in the notes and we'll put the complete gauge together for you.

£88.00 – £2,903.00Price range: £88.00 through £2,903.00 ex VAT

View product

Bore Gauges · Setting Rings

ZR Setting Rings (for BMD)

DIATEST ZR setting rings, an economical alternative to DIN rings for setting BMD plug gauges, from Ø 8 mm. Ordering: choose your options and add them to the quote basket. Please give the exact nominal size, tolerance and any special requirements in the order notes when you send your quote request. Prices are NET, ex VAT. A complete BMD gauge needs:

  1. BMD plug gauge (S, D or FB type, made to your size)
  2. Indicator holder (MH), or a DIATRON1500-S which replaces holder and indicator
  3. Indicator: analogue MU or digital MDU
  4. Setting ring: DIN 2250-C or ZR (this product)
Add each part to your quote basket, or just tell us in the notes and we'll put the complete gauge together for you.

£107.00 – £811.00Price range: £107.00 through £811.00 ex VAT

View product

Bore Gauges · Indicators

Analogue Indicators MU & MU-HQ

Analogue dial indicators for bore gauging: Ø 58 mm MU and Ø 57 mm MU-HQ, metric and inch graduations, with a choice of measuring pressures. Ordering: choose your options and add them to the quote basket. Please give the exact nominal size, tolerance and any special requirements in the order notes when you send your quote request. Prices are NET, ex VAT. A complete BMD gauge needs:

  1. BMD plug gauge (S, D or FB type, made to your size)
  2. Indicator holder (MH), or a DIATRON1500-S which replaces holder and indicator
  3. Indicator: analogue MU or digital MDU (this product)
  4. Setting ring: DIN 2250-C or ZR
Add each part to your quote basket, or just tell us in the notes and we'll put the complete gauge together for you.A complete split-ball gauge needs:
  1. Split-ball probe with its needle (choose "with needle" on the probe page)
  2. Indicator holder (MH6 range)
  3. Indicator: analogue MU or digital MDU (this product)
  4. DIATEST setting ring for the probe size
Add each part to your quote basket, or just tell us in the notes and we'll put the complete gauge together for you.

£117.00 – £353.00Price range: £117.00 through £353.00 ex VAT

View product

Indicators

Digital Indicator MDU-A125

High-resolution digital indicator: 0.001 mm resolution, 12.5 mm (0.5") measuring range, metric or imperial units, supplied with a printed test certificate. Ordering: choose your options and add them to the quote basket. Please give the exact nominal size, tolerance and any special requirements in the order notes when you send your quote request. Prices are NET, ex VAT. A complete BMD gauge needs:

  1. BMD plug gauge (S, D or FB type, made to your size)
  2. Indicator holder (MH), or a DIATRON1500-S which replaces holder and indicator
  3. Indicator: analogue MU or digital MDU (this product)
  4. Setting ring: DIN 2250-C or ZR
Add each part to your quote basket, or just tell us in the notes and we'll put the complete gauge together for you.A complete split-ball gauge needs:
  1. Split-ball probe with its needle (choose "with needle" on the probe page)
  2. Indicator holder (MH6 range)
  3. Indicator: analogue MU or digital MDU (this product)
  4. DIATEST setting ring for the probe size
Add each part to your quote basket, or just tell us in the notes and we'll put the complete gauge together for you.

£593.00 ex VAT

View product

Indicators

DIATRON1500-S

All-in-one hand-held measuring device: indicator, handle and wireless transmitter in one unit, with 0.0001 mm resolution and a built-in tolerance band display. Ordering: choose your options and add them to the quote basket. Please give the exact nominal size, tolerance and any special requirements in the order notes when you send your quote request. Prices are NET, ex VAT. A complete BMD gauge needs:

  1. BMD plug gauge (S, D or FB type, made to your size)
  2. Indicator holder (MH), or a DIATRON1500-S which replaces holder and indicator (this product)
  3. Indicator: analogue MU or digital MDU
  4. Setting ring: DIN 2250-C or ZR
Add each part to your quote basket, or just tell us in the notes and we'll put the complete gauge together for you.

£1,136.00 ex VAT

View product

Indicator Holders · Indicators

Indicator Holders (MH)

Indicator holders for BMD plug gauges, Split-Ball, Plunger Probes and Gear gauges. Choose your thread connection, then the holder you need. Metric, clamping bore 8H7. Ordering: choose your options and add them to the quote basket. Please give the exact nominal size, tolerance and any special requirements in the order notes when you send your quote request. Prices are NET, ex VAT. A complete BMD gauge needs:

  1. BMD plug gauge (S, D or FB type, made to your size)
  2. Indicator holder (MH), or a DIATRON1500-S which replaces holder and indicator (this product)
  3. Indicator: analogue MU or digital MDU
  4. Setting ring: DIN 2250-C or ZR
Add each part to your quote basket, or just tell us in the notes and we'll put the complete gauge together for you.A complete split-ball gauge needs:
  1. Split-ball probe with its needle (choose "with needle" on the probe page)
  2. Indicator holder (MH6 range) (this product)
  3. Indicator: analogue MU or digital MDU
  4. DIATEST setting ring for the probe size
Add each part to your quote basket, or just tell us in the notes and we'll put the complete gauge together for you.

£13.00 – £283.00Price range: £13.00 through £283.00 ex VAT

View product

Bore Gauges · Indicator Accessories · Indicators

Indicator Contact Points, Extensions & Lifting Levers

Spare contact points, indicator extensions, lifting levers and spring force enhancers for DIATEST indicators. Ordering: choose your options and add them to the quote basket. Please give the exact nominal size, tolerance and any special requirements in the order notes when you send your quote request. Prices are NET, ex VAT.

£2.00 – £54.00Price range: £2.00 through £54.00 ex VAT

View product

Bore Gauges · Indicators

Digital Indicators MDU-S125, MDU-C125 & MDU-EC125

More of the MDU digital indicator range: the compact MDU-S125, the angle-display MDU-C125 and the handy MDU-EC125, plus radio modules. Ordering: choose your options and add them to the quote basket. Please give the exact nominal size, tolerance and any special requirements in the order notes when you send your quote request. Prices are NET, ex VAT. A complete BMD gauge needs:

  1. BMD plug gauge (S, D or FB type, made to your size)
  2. Indicator holder (MH), or a DIATRON1500-S which replaces holder and indicator
  3. Indicator: analogue MU or digital MDU (this product)
  4. Setting ring: DIN 2250-C or ZR
Add each part to your quote basket, or just tell us in the notes and we'll put the complete gauge together for you.

£265.00 – £737.00Price range: £265.00 through £737.00 ex VAT

View product

Bore Gauges · Checking Stands

MST58 Checking Stand

Compact bench checking stand for measuring small parts with split-ball probes and BMD plug gauges. Ordering: choose your options and add them to the quote basket. Please give the exact nominal size, tolerance and any special requirements in the order notes when you send your quote request. Prices are NET, ex VAT.

£73.00 – £1,320.00Price range: £73.00 through £1,320.00 ex VAT

View product

Bore Gauges · Checking Stands

MST102 Universal Checking Stand

Universal checking stand with platen and jib arm for larger parts, floating holders and BMD plug gauges. Ordering: choose your options and add them to the quote basket. Please give the exact nominal size, tolerance and any special requirements in the order notes when you send your quote request. Prices are NET, ex VAT.

£25.00 – £4,669.00Price range: £25.00 through £4,669.00 ex VAT

View product

Bore Gauges · Checking Stands

External Diameter Gauge (AMG)

Self-centring outside diameter gauge, supplied with a KM1 mini fixture. Ordering: choose your options and add them to the quote basket. Please give the exact nominal size, tolerance and any special requirements in the order notes when you send your quote request. Prices are NET, ex VAT.

£2,288.00 ex VAT

View product

Bore Gauges · Checking Stands

Checking Stand Accessories (Mini Fixtures & Setting Anvils)

KM mini fixtures (single and multi-station), holders, clamps and MZT setting anvils for checking stands and external gauges. Ordering: choose your options and add them to the quote basket. Please give the exact nominal size, tolerance and any special requirements in the order notes when you send your quote request. Prices are NET, ex VAT.

£21.00 – £1,885.00Price range: £21.00 through £1,885.00 ex VAT

View product

Bore Gauges · Measuring Tables

DIA-COME C2 Measuring Table

Two-point measuring table for fast inner and outer diameter checks on rings, bearings and turned parts. Ordering: choose your options and add them to the quote basket. Please give the exact nominal size, tolerance and any special requirements in the order notes when you send your quote request. Prices are NET, ex VAT.

£417.00 – £13,219.00Price range: £417.00 through £13,219.00 ex VAT

View product

Bore Gauges · Measuring Tables

DIA-COME C3 Measuring Table

Three-point measuring table for checking diameters and roundness on rings and turned parts. Ordering: choose your options and add them to the quote basket. Please give the exact nominal size, tolerance and any special requirements in the order notes when you send your quote request. Prices are NET, ex VAT.

£619.00 – £4,486.00Price range: £619.00 through £4,486.00 ex VAT

View product

Bore Gauges · Depth Extensions & Accessories

Depth Extensions (TV)

Depth extensions from 20 mm to 1 m for measuring deep bores with split-ball probes and BMD plug gauges. Ordering: choose your options and add them to the quote basket. Please give the exact nominal size, tolerance and any special requirements in the order notes when you send your quote request. Prices are NET, ex VAT.

£70.00 – £892.00Price range: £70.00 through £892.00 ex VAT

View product

Bore Gauges · Depth Extensions & Accessories

Depth Stops (TA)

Depth stops to measure bores at a fixed, repeatable depth, in flange diameters from 24 to 260 mm. Ordering: choose your options and add them to the quote basket. Please give the exact nominal size, tolerance and any special requirements in the order notes when you send your quote request. Prices are NET, ex VAT.

£14.00 – £591.00Price range: £14.00 through £591.00 ex VAT

View product

Bore Gauges · Depth Extensions & Accessories

Right Angle Attachments (W)

Right angle attachments at 90°, 60° and 45° for reading the indicator from the side when access is tight. Ordering: choose your options and add them to the quote basket. Please give the exact nominal size, tolerance and any special requirements in the order notes when you send your quote request. Prices are NET, ex VAT.

£120.00 – £660.00Price range: £120.00 through £660.00 ex VAT

View product

Bore Gauges · Depth Extensions & Accessories

Thread Adaptors (A)

Adaptors to run Series 4 and Series 6 gauges on Series 6 and Series 10 holders and accessories. Ordering: choose your options and add them to the quote basket. Please give the exact nominal size, tolerance and any special requirements in the order notes when you send your quote request. Prices are NET, ex VAT.

£14.00 – £193.00Price range: £14.00 through £193.00 ex VAT

View product

Can't find what you need?

Our UK team can supply the full DIATEST range, including special gauges, setting rings and complete measuring solutions.